Site Design By:
Design Studios, LLC.
All Trademarks and Registered logos are the sole property of their respective companies.
|
-- Tremco Web Site --
N A V I G A T I O N
Glazing Sealants
Glazing Tapes
Glazing Extrusions
Below Grade
Coatings & Sealers
Wide Expansion Joints
Firestopping
Sealants
| Glazing Sealants |
Description |
Colors |
| Proglaze II |
A two-part, high modulus structural silicone sealant, consisting of a white base and a black curing agent. |
Black |
| Spectrem 2 |
A one-part, high performance, neutral cure, medium modulus, silicone sealant. |
White, off-white, dark bronze, gray and black |
| Spectrem I |
A low modulus, high performance, one-part, basic cure, architectural grade silicone joint sealant. |
Precast white, off-white, limestone, bronze aluminum stone, graystone and black |
| Tremsil 600 |
A one-part, medium modulus, neutral cure silicone sealant. |
Translucent, white, bronze, aluminum and buff |
| Proglaze |
A one-part, moisture curing, silicone sealant. Rapidly cures to produce a durable, flexible seal. |
Translucent, white, bronze, aluminum and black |
| Mono 555 |
A proprietary acrylic polymer of high solids, cures through solvent release. Excellent U.V. resistance & unprimed adhesion. |
Limestone, buff, white, off-white, redwood, tan, black, aluminum stone, bronze, graystone, ivory and brown |
| Ultrem 1500 |
A high solids, low shtinkage acrylic latex sealant. |
Translucent, white, buff and custom colors available |
| Tremco 830 |
A one-part, solvent release, fast skinning, thermoplastic, elastomeric sealant. |
Clear, white, buff, dark brown, ivory, timberstone, graystone, brick red and black |
| Tremco Butyl Sealant |
A solvent release forulated from a blend of butyl rubber and polyisobutylene. |
Aluminum stone, white, bronze and black |
| Tremco Curtainwall Sealant |
Synthetic rubber. A non-drying, non-skinning sealant with excellent adhesion. |
Dark gray |
[top]
| Glazing Tapes |
Description |
Colors |
| 440 Tape |
100% solids, cross-linked, butyl rubber, preformed sealant. |
Aluminum and black bronze |
| Polyshim II |
A micro-polyisobutylene preformed butyl sealant with built-in spacer of synthetic rubber. |
Black bronze |
| Glazing Tape 920 |
A high density closed sell urethane foam tape with PSA on one or both sides. |
Gray |
[top]
| Glazing Extrusions |
Description |
| Arrow-Shim |
Precision extruded EPDM drive-in spacer-shims. |
| Poly-Wej |
Extruded in EPDM and Neoprene compounds for use in compression glazing systems. |
| Vision Strip |
A co-extruded composite made up of EPDM rubber at the sightline and polyisobutylene, preformed rubber sealant. |
| Cellular |
Closed cell EPDM and Neoprene extruded rubber. |
| Dense EPDM & Neoprene |
40, 50, 60, 70 and 90 durometer Shore A extruded EPDM and Neoprene. |
| Dense Silicone |
40, 60, 70 and 80 durometer Shore A extruded silicone rubber. |
| Dense SCR-900 |
60 and 70 durometer Shore A extruded Silicone Compatible Rubber. |
| Dense SCR-820 & SCR-880 |
60, 70, 80 and 90 durometer Shore A extruded thermoplastic Silicone Compatible Rubber. |
[top]
| Below Grade |
Description |
| Vulkem 201 & Tremproof 60 |
Cold-applied, bitumen-modified, single component, moisture curing polyurethane waterproofing membrane. Several grades to meet your specific application. |
| Tremproof 150 |
Hot-applied, single component, rubberized asphalt waterproofing membrane consisting of 100% solids. Self-healing properties under presure. |
| Paraseal |
Dual waterproofing sheet system combining the strength and puncture resistance of HDPE with the expanding capabilities of bentonite clay. |
| Paraseal GM |
Composite Paraseal sheet system utilized to form a superior barrier to both water and aliphatic gases. |
| Paraseal LG |
Paraseal waterproofing membrane with an additional layer of spunpolypropylene to resist damage from abrasive concrete pours or direct installation of shortcrete. |
| Deckseal |
Designed for elevated decks where flood testing is required. |
[top]
| Coatings & Sealers |
Description |
| Vulkem 350/351 & PBS-850 HP |
Composite deck waterproofing system consisting of tough-curing polyurethane. Also Available in no V.O.C "NF" system. |
| Vulkem 350/345/346 |
Modified polyurethane vehicular traffic deck coating system composed of a basecoat (350), heavy duty wear coat (345) and finish coat (346). |
| Vulkem 450/451 |
Polyurethane roof waterproofing system combining a flexible and durable basecoat (450) with an ultraviolet and ozone resistant topcoat(451). |
| Vulkem 450/320 |
Elastomeric coating system combining the best of both polyurethane and epoxy tehcnoligies. |
| Vulkem 2211 HD |
Water-dispersed, low odor, V.O.C. compliant penetrating silane sealer. |
| Vulkem 2212 |
Single-component, low odor, V.O.C. compliant, 100% solids, deep penetrating silane sealer. |
[top]
| Wide Expansion Joints |
Description |
Standard Dimensions |
| Vulkem 255 FM |
Factory Molded joint system consisting of a durable, pre-molded polyurethane seal, bonded to concrete using a polymeric nosing compound. |
Available in 4" to 12" widths, textured or smooth. |
| Vulkem 265 HD |
Heavy Duty expansion joint system consisting of a special designed santoprene seal embeded in an epoxy mortar nosing material. |
Available in 1" to 3" widths. |
| Vulkem 275 ED |
Extreme Duty expansion joint system consisting of a continuous, two-ply, nylon reinforced, molded meoprene seal, bedded in a high strength urethane sealant. |
Available for the following expansion joint range: 1-¼" to 3-¼". |
[top]
| Firestopping |
Regional model building code(s) approved |
| TREMstop IA |
Flexible, water-based intumescent acrylic sealant for use in firestopping most general applications. |
| TREMstop Acrylic |
Flexible acrylic sealant for use in both through penetrations and fire-rated joints and gaps. Sprayable grade also available. |
| TREMstop WS |
Flexible intumescent wrap strip available in two widths to firestop combustible penetrations. |
| TREMstop D |
Intumescent device for plastic pipe consisting of the correct amount of TREMstop WS in a pre-fabricated collar. |
| FYRE-CAN |
Cast-in-place firestop system for plastic pipe penetrating concrete floor assemblies. |
| FYRE-CAN SLEEVE |
Intumescent sleeve device system designed to firestop plastic pipe penetrating wall assemblies. |
| TREMstop PS |
Moisture resistant, dust free fiberglass pillows containing a unique intumescent material. |
| FYRE-SIL and FYRE-SIL S/L |
Medium modules, neutral cure, one-part silicone sealant for use in both through penetrations and fire-rated joints. S/L - Self-Leveling. |
| FYRE-SHIELD |
Endothermic, non-sag, ceramic sealant designed to withstand extreme temperatures. |
[top]
| Sealants |
Description |
Colors |
| Dymeric 511 |
Low modulud, pattented, multi-component oilgomeric polyurethane. |
50 standard colors. Custom colors available upon request. |
| Dymeric |
Multi-component, non-staining, epoxidized polyurethane joint sealant. |
50 standard colors. Custom colors available upon request. |
| Dymonic |
A low modulus, one component, moisture curing, modified polyurethane joint sealant. |
White, off-white, limestone, beige, redwood tan, bronze, aluminum stone and black |
| Tremflex SL |
A one-part, self leveling polyurethane joint sealant. |
white, gray, limestone, dark tan and black |
| THC - 900/901 |
Multi-component, polyurethane joint sealants, self-leveling (HTC - 900) or slope grade (THC - 901). |
50 standard colors. Custom colors available upon request. |
| HPL |
High Point Load sealant. A hybrid multi-component, chemically curing, non-sag polyurethane sealant. |
50 standard colors. Custom colors available upon request. |
| Mono 555 |
The industry leading one-part, acrylic terpolymer. The original scrylic sealant with over 30 years of proven performance. |
Limestone, buff, white, off-white, redwood tan, black, aluminum stone, bronze, ivory and brown |
| Tremco Butyl Sealant |
Formulated from a blend of butyl rubber and polyisobutylene. |
White, bronze, aluminum stone and black |
| Tremflex 834 |
Siliconized acrylic latex sealant that produces a fast-setting, pliable seal with minimum shrinkage. |
Black, bronze, limestone, white, aluminum stone, brown, buff, beige, cedar, vory and cream |
| Vulkem 116 |
A single component, gun grade polyurethane joint sealant. |
White, limestone, aluminum, gray, dark tan, bronze, brown, black, redwood tan and almond |
| Vulkem 227 |
A two-part, gun grade polyurethane elastomeric sealant. |
White, limestone, aluminum, gray, dark tan, bronze, brown, black, redwood tan and almond |
| Vlukem 921 |
A one-part, moisture curing, gun grade polyurethane sealand. |
White, limestone, aluminum, gray, dark tan, bronze, brown, black, redwood tan and almond |
| Vulkem 922 |
A two-part, chemically curing, gun grade polyurethane building joint sealant with exceptional adhesion. |
Available in 56 standard colors |
| Vulkem 203 |
A one component, gun grade, tar modified polyurethane joint sealant. |
Black |
| Vulkem 45 |
A one-part, moisture curing, self leveling, pour grade polyurethane joint sealant. |
White, limestone, gray, dark tan and black |
| Vulkem 245 |
A two-part, chemically curing, self leveling, pour grade polyurethane joint. |
White, limestone, gray, dark tan and black |
| Vulkem 202 |
A two-part, jet fuel resistant, tar-modified, self leveling polyurethane joint sealant. |
Black |
| Vulkem 617 |
A V.O.C. compliant, one-part, high modulus, gun grade, non-sag polyurethane sealant. |
White |
[top]
|
|
